Bin Shellac Based Primer is the primer you need to seal bleed from tannins, water stains, inks and more. It also will block odors.
Bin Shellac Base interior & spot exterior primer Ultimate Stain blocker.
Sticks to all surfaces, seals knots, dries in 45 minutes, blocks odors.
White. 1 quart.
BIN is the ultimate stain blocking primer-sealer for whole-surface interior priming and exterior spot priming. It combines lighting fast dry time, outstanding adhesion and extraordinary stain blocking power, making it the choice of professionals for new construction, remoceling and fire and water damage restoration. May be used under and over any latex or oil-base architectural paint.
ABOUT B-I-N SHELLAC-BASE PRIMER
Looking for a “silver bullet” primer that covers everything unwanted? Use the one contractors keep in their vans: Zinsser B-I-N Primer. As the original, shellac-base primer-sealer, nothing is better at permanently blocking stains, odors and wood knots.
- Shellac-base primer-sealer
- For interior and spot exterior use
- Greatest stain sealer
- Seals knots and sap streaks
- Seals pet, smoke and musty odors
- Sticks to all surfaces without sanding
- Lightning fast dry – recoat in 45 minutes
FOR BEST RESULTS
Use indoors or for spot exterior use. Works with any top coat
Priming: Use to prime all types of bare or painted interior surfaces including wood, drywall, cured plaster, concrete, stucco and masonry, metal and PVC. Adheres to dense, glossy surfaces without sanding or deglossing.
Spot Priming: BIN is great for exterior spot priming and is the only primer that effectively seals knots and sap streaks.
Sealing: BIN seals porous surfaces and dries to a smooth finish so paints have better coverage and consistent sheen. The traditional enamel undercoat for professionals.
Stain and Odor Blocking: BIN will block stains from water, grease, oil, soot, rust, mildew, tannin, even crayon and lipstick, and will effectively block odors from fire damage, smoke mildew, pet urine, fireplace and furnace puff-backs, etc.
Surface Prep: Surface should be clean, dry, sound and free of dust, dirt, excessive chalky material, grime, grease, oil, wax, mildew, wallpaper adhesive or any contamination that may interfere with adhesion. If unsure, wash surface with an appropriate cleaner. Kill any mold or mildew.
Application: Eliminate all sources of ignition such as sparks or open flames and ensure adequate ventilation. Shake or stir well and apply using brush or roller. Apply between 0 degrees F and 90 degrees F.
Coverage: Approx. 100-125 SF per quart.May vary with application method and surface porosity.
Dry time: Dries to the touch in about 15 minutes, can be topcoated in 45 minutes.
Cleanup: equal parts household ammonia and water or denatured alcohol. Wipe up splatters before they dry.
Limitations: Not recommended for full surface application on exterior substrates, for excessively humid interior areas or surfaces subject to immersion or prolonged contact with water.
For more info see manufacturer’s info here.